Product Overview
The Vehicle-bone AIO device TC8510/TC8610 Integrates RDSS module, RNSS B1/GPS L1 module, antenna, control board etc. It has high integration and low power consumption, and can fully implement RDSS positioning and short message communication functions, and receive satellite navigation signals of RDSS and RNSS B1/GPS L1 in real time.
The device is small-sized and low in power consumption. It adopts 6-pin waterproof connector, which is easy to connect and operate, and is very suitable for large-scale application such as vehicle navigation.
Product Features
Positioning
Short message communication
RNSS B1/GPS dual-mode navigation or GPS single-mode navigation supported
Local serial port parameter configuration supported
Specification
RDSS Product Specification |
||
Feature |
Sensitivity of Receiving Signal |
-127.6dBm |
Transmitting Power |
TC8510: 37dBm |
|
TC8610: 40dBm |
||
Positioning |
Success rate: ≥95% |
|
Accuracy: ≤100m |
||
Lock Time |
Cold-start first capture time: ≤2s |
|
Loss of lock and recapture time: ≤1s |
||
Automatic positioning time: ≤2min |
||
Time Output |
UTC time output |
|
Electrical |
Voltage |
Input: +11V to +32V, P-P ripple voltage: 100mV (max) |
Current |
Current limit of power supply: ≥3.5A suggested (+11V power supply) |
|
Mechanical |
Dimension |
As shown in the picture below |
Hardware Interface |
12G-2A-6A |
|
Other |
MTBF |
≥25000h |
RNSS B1 Main Specification |
||
Feature |
Input Spot |
RNSS B1 |
Positioning Output Rate |
1Hz |
|
Locking Time |
Cold-start time: 37s (average) |
|
Recapture time: ≤1s (under the condition of loss of lock≤5s) |
||
Warm-start time: ≤2s |
||
Accuracy |
Horizontal Position |
5m |
Vertical Position |
10m |
|
Velocity |
0.1m/s |
|
Pulse per Second Output |
Pulse Width |
500ms |
Pulse per Second Period |
1s |
|
Pulse per Second Accuracy |
100ns |
Hardware Interface (Outline Drawing, unit: mm)
6-pin waterproof connector, 12G-2A-6A as shown below
Connector Pin Definition |
||
No. |
Definition |
Remark |
1 |
VCC |
Power Interface |
2 |
GND |
|
3 |
RXO |
UART0, RDSS communication interface, 3.3V TTL level |
4 |
TXO |
|
5 |
RX1 |
UART1, RNSS/GPS communication, 3.3V TTL level, compatible with direct output by UART0 |
6 |
TX1 |
Self-owned Monitoring Platform avialable.