Your Position:Home>Products>Latest Customization>Latest Customization Products

Latest Customization Products

  • Price:Negotiable
Contact Supplier:

Product Detail

    Bandpass Filter

    1. Passband frequency: 14.0 to 14.8GHz
    2. Insertion loss: 1.0dB max
    3. Passband ripple: 0.4dB max
    4. VSWR: 1.3:1 max
    5. Stopband rejection@DC to 13.4GHz and 15.4 to 26GHz
    6. Input/output connector: SMA-F

    7. Reference dimension: 80×16×9mm



    Wide-band Equalizer

    1. Working frequency: 2.0 to 18.0GHz

    2. Response shape: negative slope

    3. Insertion loss: 2.0dB typ

    4. Attenuation: 11dB typ (±0.5dB max)

    5. VSWR: 2.0:1 max

    6. Linearity: ±1.0dB

    7. Input/output connector: SMA-M

    8. Dimension: 40×13×7mm



    SPDT Coaxial Switch

    1. Working frequency: DC to 4.0GHz

    2. Isolation: 70dB

    3. Insertion loss: 0.2dB

    4. VSWR: 1.2:1

    5. Power handling: 100W max

    6. Switch sequence: Break-before-make

    7. Switch time: 15ms max

    8. Service life: One million times

    9. Vibration (operating): 20 to 2000Hz, 10g RMS

    10. Mechanical shock (non-operating): 50g, 1/2 sine, 11ms

    11. Connector: RF: SMA-F

          Power and control interface: binding post

    12. Dimension: 40×50×15mm



    WR-75 Horn Antenna

    1. Working Frequency: 9.84 to 15GH

    2. Gain 10dBi typ

    3, Interface: WR-75

    4. Polarization: Linear

    5. Dimension: 64×39×28mm





    Detector

    1. Working frequency: 100MHz to 20GHz

    2. Frequency: ±0.5dB

    3. VSWR: ≤1.3@100MHz to 15GHz

    ≤1.5 to 20GHz

    4. Low sensivity: 0.4mV/μW

    5. Video impedance: 0.8 to 7.5KΩ

    6. Output capacitor: 3.0pF

    7. Input power: 15dBm max

    8. Connector: Input: SMA-M

                       Output :SMA-F

    9. Reference dimension: 30×ɸ10mm



    Active Equalizer

    1. Working frequency: 2.0 to 4.0GHz

    2. Response shape: positive slope

    3. Insertion loss: ≤1.0dB@3.5GHz

    4. Attenuation: 5.0dB

    5. Linearity: ±0.6dB

    6. Input/output VSWR: 1.8:1 max

    7. Input/output connector: SMA-K

    8. Reference dimension: 41×25.4×10.5mm



    Directional Coupler

    1. Working frequency: 4.0 to 8.0GHz

    2. Coupling: 6.0±1.0dB

    3. Insertion loss: (1.8dB is the 1.8dB is the theoretical coupling loss of mainline)

    4. Power handling: 10W

    5. VSWR: 1.30:1 max

    6. Directivity: 18dB min

    7. Connector: SMA-F





    Power Amplifeir

    1. Working frequency: 2.9 to 3.5GHz

    2. Output power: 43dBm (CW)

    3. In-band fluctuation: ≤3dBm@2.9 to 3.5GHz

    4. Spurious Suppression: ≤-60dBC@43dBm

    5. VSWR: 2.0:1 max

    6. RF output enable/disable: High@3 to 5V, on

                                           Low@≤0.5V, off

    7. RF noise level at output when disable: ≤-90dBm@43dBm

    8. Efficiency: ≥30%@43dBm

    9. Temperature protection (@DB9-1): RF output disable@85±5°C, 3.3V out

                                                        RF output enable@65°C±5°C, 0V

    10. Input connector: SMA-K

         Output connector: TNC-K

    11. Reference dimension: 200×140×26mm



    Power Amplifier

    1. Working frequency: 9.75 to 10.25GHz

    2. Small signal gain: 50dB min

    3. Gain var. over temp.: -0.06dB/°C typ

    4. PSAT@5dBm input: 100W typ

    5. Noise figure: 8dB max

    6. VSWR: Input: 2.0:1 nom

                  Output: 1.5:1 nom

    7. Harmonics: -20dBc typ@PSAT

    8. Spurious: -65dBc typ

    9. PAE: 30% typ

    10. Power handling: 15dBm max

    11. Mismatch handling: 5.0:1 max

    12. DC on/off: 1μs; TTL logic-low “0V”: on. High“5V”: off

    13. Over temp. and over current protection

    14. Dual directional couplers for forward and reverse power

    15. Connector: Type1: Input: SMA-F

                                   Output: N-F

                         Type2: Input: SMA-F

                                   Output: WR-90



    4 Channels Phased Array T/R Module

    1. Working frequency: 8.0 to 12.0 GHz

    2. Number of channels: 4

    3. Channel spacing: 15mm

    4. CNC phase shifter:

               Digit: 6, Stepping: 5.625°, RMS deviation: 5°max

           5. CNC attenuator (receiving):

               Digit: 6, Stepping: 0.5dB, RMS deviation: 1.0dB max

           6. Maximum input level of transmitting: 0dBm

           7. Maximum duty cycle: 30%

    8. Saturation output power of transmitting: 15W

    9. Drop pulse of peak power: 1.0dB max

    10. In-band fluctuation of received gain: ±0.5dB

    11. Input P1dB: -20dBm min

    12. Time interval between transmitting shutdown to receiving open: 0.15μs

         Time interval between receiving shutdown to transmitting open: 0.15μs

    13. 0 State phase congruency: ±25°

    14. Phase noise degradation: ≤3.5dB (phase noise of source -105dBc/Hz@1kHz, 10GHz)

    15. Efficiency: ≥18% (rated value, duty cycle of 20%)

    16. VSWR at collecting port (standby included): ≤1.8:1

    17. VSWR at antenna port (standby included): ≤1.7:1

    18. Reference dimension: 80mm×59.8mm×10mm

    19. MTBF: 75000h

    20. RF connector: SMP

         Power and control connector: 21 pins Micro-rectangular
Live Chat